In our last blog (Troubleshooting Your Air Conditioning Part 1), we talked about some of the troubleshooting tips that you can do when you are not getting any air out of your air conditioning unit. In this blog, we would like to talk about what you can do when your air conditioning is not cooling your home well. We all know that if you are cooling your home, you notice pretty quickly when it is not working so you will want to find a solution as quickly as you can. If you don’t know where to start when it comes to troubleshooting, these steps can help but if you are unsure what needs to be done, you can call Alltech Air Conditioning at anytime.
Turn off power
Just like anything else, the safest thing to do is turn the appliance off before you check out what is going on.
2. Remove the door and check the filter
In order to access the filter, you need to remove the door. Check the filter to see if you need to clean or replace it.
3. Look for ice
If there is ice around the coils, replace the door and turn the unit on again. The ice should melt within the next couple of hours.
4. Clean the drain
To get rid of the excess water that was created due to the unit removing the water from the air, you first need to clean the drain pipe of algae. Water is also likely to pool around the unit if there is a leak. After removing the water, check back to see if more water appears.
5. Check and clean the compressor
The compressor is outside of the unit and needs to be cleaned of debris and bushes. But the first step is to make sure that the compressor is indeed working. You will also see the fan running. If it is not, try to get it started with a screwdriver. If the fan starts going, then you may have a bad capacitor that will need to be replaced by a technician.
If you have done these steps and still cannot figure out what is going on with your air conditioning unit, call Alltech Air Conditioning today.